menu_book Explore the article's raw data

Total Synthesis and Determination of the Absolute Configuration of Berkeleylactone I

Abstract

Herein, we report the first total synthesis of berkeleylactone I and its 12S diastereomer. Consequently, this chemical synthesis allowed us to establish the unknown absolute stereochemistry at the C-12 center as 12R, which was unidentified by the isolation group. This synthetic approach includes several critical reactions, such as the Sharpless asymmetric dihydroxylation, Baran's Ni-catalyzed alkyl-alkyl cross-coupling reaction, Brown allylation, Mitsunobu reaction, and ring-closing metathesis, as key steps.

article Article

date_range 2024

language English

link Link of the paper

format_quote

Mandal Sudip

Mahananda Dora

Paladugu Dileep

Thirupathi Barla

Sorry! There is no raw data available for this article.

Loading references...

Loading citations...

shopping_basket PURCHASE DATA

Effect of corrosion on flexural strength of reinforced concrete beams with polypropylene fibers

Abstract

An experimental study was performed to investigate the effects of polypropylene fibers on uncorroded and corroded reinforced concrete beams. Three different volume fractions of polypropylene fibers having 0, 0.5, and 1.5%, were tested at four corrosion levels of 0% and approximately 5, 7, and 9%. A full scale of an accelerated corrosion pool was used for the accelerated corrosion process. Reinforced concrete beams were used for an under monotonic bending test. The contribution of the actual corrosion levels of transverse and longitudinal reinforcement bars to the total corrosion levels were obtained from reinforcement bars fully extracted from concrete. Flexural strength, bond-slip, and moment-curvature relationships were examined for uncorroded and corroded reinforced concrete beams. A new model was developed to predict the flexural strength of corroded reinforced concrete beams. The proposed model for predicting the residual flexural strength of corroded beams was compared with test data published in previous studies. Furthermore, a novel model is presented for improved predictions between the actual and theoretically estimated corrosion mass losses, based on Faraday’s law, with the aid of fully extracted reinforcement bars. The model used to predict the flexural strength of corroded reinforced concrete beams with large sizes demonstrated good agreement with current and previously published literature data. In the case of corroded beams comprising differing amounts of polypropylene fibers, the performance of the corroded beams was limited by a fiber volume fraction of 1.5% at low corrosion levels.

article Article

date_range 2018

language English

link Link of the paper

Load-displacement...

A0 (xlsx)